ELECTRIC STEERING LOCK > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


The intelligent tester can be used during steps 2, 6, 9 and 12.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CHECK AND CLEAR DTCs

      NEXT


      3.PROBLEM SYMPTOM CONFIRMATION


        		.
        SYMPTOM DOES NOT OCCUR (Go to step 4)

        		.
        SYMPTOM OCCURS (Go to step 5)

        4.SYMPTOM SIMULATION

          NEXT


          5.CHECK MULTIPLEX COMMUNICATION SYSTEM

            HINT:
            Check that there are no problems in the multiplex communication system before troubleshooting the steering lock system.


          NEXT


          6.DTC CHECK


            		.
            DTC IS NOT OUTPUT (Go to step 7)

            		.
            DTC IS OUTPUT (Go to step 8)

            7.PROBLEM SYMPTOMS TABLE


              		.
              Go to step 9

              8.DTC CHART

                NEXT


                9.CIRCUIT INSPECTION

                  NEXT


                  10.PROBLEM IDENTIFICATION

                    NEXT


                    11.REPAIR OR REPLACEMENT

                      NEXT


                      12.CONFIRMATION TEST

                        NEXT

                        END