Terminal No. (Symbols)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
L28-1 (GND) - Body ground
| W-B - Body ground
| Ground
| Always
| Below 1 V
|
L28-2 (SGND) - Body ground
| W-B - Body ground
| Signal ground
| Always
| Below 1 V
|
L28-3 (IGE) - L28-1 (GND)
| LG - W-B
| Power source for motor drive
| - Motor is in operation
- Motor is not in operation
| - Below 1 V
- 10 to 12 V
|
L28-4 (SLP1) - L28-2 (SGND)
| V - W-B
| Unlock position sensor output signal
| - When steering is locked
- When steering lock is released
| - 10 to 14 V
- Below 1 V
|
L28-5 (LIN) - L28-2 (SGND)
| W - W-B
| LIN communication bus
| Engine switch on (IG)
| Pulse generation
|
L28-6 (IG2) - L28-1 (GND)
| B - W-B
| IG signal input
| Engine switch on (IG)
| 10 to 14 V
|
L28-7 (B) - L28-1 (GND)
| L - W-B
| Power source
| Always
| 10 to 14 V
|
