WIRELESS DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to record the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Wireless door lock control system 
Display (Item)
Default
Contents
Setting
Hazard Answer Back
ON
When wireless lock switch on transmitter is pressed, this function illuminates all hazard warning lights once. When unlock switch is pressed, all hazard warning lights illuminate twice
ON / OFF
Wireless Control
ON
ON /OFF of the wireless door lock function
ON / OFF
Open Door Warning
ON
If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds
ON / OFF
Trunk Lid Operation
0.8 s PR
This function changes transmitter operation method for opening luggage compartment door
1 time / 2 times/ 0.8 s PR / OFF
Unlock 2 Operation
All door
Pressing UNLOCK switch unlocks all doors. If setting is D door, pressing UNLOCK switch once unlocks driver side door
All doors / D door
Auto Lock Time
30 s
To change time until relocking after unlocking with wireless door lock function
60 s / 30 s
Wireless Buzzer Resp
ON
ON / OFF on wireless buzzer response function
ON / OFF
Panic Function*
ON
Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 2.5 seconds. If a panic switch is equipped, press panic switch instead of lock switch
ON / OFF

HINT:
*: w/ PANIC switch