ELECTRONIC POWER STEERING SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK FOR DTCs


    C107416E04

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Read the DTCs by following the display on the intelligent tester.

    HINT:
    Refer to the intelligent tester's operator's manual for further details.


CLEAR DTCs

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Clear the DTCs by following the display on the intelligent tester.

    HINT:
    Refer to the intelligent tester's operator's manual for further details.