POWER TILT AND POWER TELESCOPIC STEERING COLUMN > PRECAUTION

for Preparation Click here



1.NOTICE FOR INITIALIZATION:

NOTICE:
If the negative battery terminal cable has been disconnected, initialize the following systems when the cable is reconnected.


System Name
See procedure
Variable Gear Ratio Steering (3UZ-FE)
 Click here
Clearance Sonar System
 Click here
Power Window Control System
 Click here
Sliding Roof System
 Click here

2.HANDLING PRECAUTION

  1. When replacing the steering column assembly (3UZ-FE):
    If replacing the steering column assembly, perform VGRS actuator angle initialization and VGRS actuator angle neutral calibration after alignment adjustment (Click here for INITIALIZATION, Click here for CALIBRATION).