POWER TILT AND POWER TELESCOPIC STEERING COLUMN > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


The intelligent tester can be used during steps 3, 6, 9 and 12.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CHECK MULTIPLEX COMMUNICATION SYSTEM

      NEXT


      3.CHECK AND CLEAR DTCs

        NEXT


        4.PROBLEM SYMPTOM CONFIRMATION


          		.
          SYMPTOM DOES NOT OCCUR (GO TO STEP 5)

          		.
          SYMPTOM OCCURS (GO TO STEP 6)

          5.SYMPTOM SIMULATION

            NEXT


            6.DTC CHECK


              		.
              NORMAL SYSTEM CODE (GO TO STEP 7)

              		.
              TROUBLE CODE (GO TO STEP 8)

              7.PROBLEM SYMPTOMS TABLE


                		.
                GO TO STEP 9

                8.DTC CHART

                  NEXT


                  9.CIRCUIT INSPECTION

                    NEXT


                    10.IDENTIFICATION OF PROBLEM

                      NEXT


                      11.REPAIR

                        NEXT


                        12.CONFIRMATION TEST

                          NEXT

                          END