FUEL LID OPENER MOTOR ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FUEL LID OPENER MOTOR ASSEMBLY


B101344

  1. Install the motor with the nut.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the connector.



2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


B084759

  1. Install the lock retainer and turn it counterclockwise as shown in the illustration.



    B084760

  1. Install the cable and turn it clockwise as shown in the illustration.



3. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LH


B109034

  1. Install the trim cover with the 3 clips.



4. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT


B107126E02

  1. Attach the 4 claws to install the trim cover.



    B110183

  1. Attach the 2 hook.



    B110747

  1. Install the 2 hooks.



5. INSTALL REAR FLOOR FINISH PLATE


B107125E03

  1. Attach the 4 clips to install the finish plate.

  1. Install the 3 clips labeled A.



6. INSTALL LUGGAGE COMPARTMENT NO. 1 TRIM HOOK

  1. Install the 4 hooks with the 2 bolts.



7. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE LH


B109034

  1. Install the trim cover with the 3 clips.

  1. Install the hook with the bolt.



8. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE RH


B109033

  1. Install the trim cover with the 3 clips.

  1. Install the hook with the bolt.



9. INSTALL TOOL BOX


B109030


10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


B109029


11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


12. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.