ENTRY AND START SYSTEM > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK POWER SOURCE MODE CHANGE FUNCTION

  1. Check the function of the engine switch.

    1. Check that power source mode changes in accordance with the conditions of the shift position and brake pedal.

      Brake Pedal
      		Shift Lever
      		Power Source Mode Pattern
      Depressed
      		P or N Position
      		When the engine switch is pushed once.
      1. off → engine start
      Not depressed
      		P position
      		Each time the engine switch is pushed.
      1. off → on (ACC) → on (IG) → off
      Except P Position
      		Each time the engine switch is pushed.
      1. off → on (ACC) → on (IG) → on (ACC)
      -
      		P Position
      		When the engine switch is pushed in the on (IG) condition.
      1. on (IG) → off
      -
      		Except P Position
      		When the engine switch is pushed in the on (IG) condition.
      1. on (IG) → on (ACC)

  1. Check if power source mode changes without pressing the engine switch.

    1. With power source mode on (ACC) and the shift position in P, wait for least 1 hour. Check that power source mode changes from on (ACC) to off automatically.



2. CHECK INDICATOR CONDITION


A109251E01

  1. Check the indicator on the engine switch.

    1. Check that the engine switch indicator illuminates and changes its color according to the table below.

      Power Source Mode/Condition
      		Indicator Light Condition
      Brake pedal released
      		Brake pedal depressed, shift lever in P or N
      off
      		OFF
      		Illuminates ON (Green)
      on (ACC, IG)
      		Illuminates ON (Amber)
      		Illuminates ON (Green)
      Engine running
      		OFF
      		OFF
      Steering lock not unlocked
      		Flashes (Green) for 30 sec.
      		Flashes (Green) for 30 sec.
      System malfunction
      		Flashes (Amber) for 15 sec.
      		Flashes (Amber) for 15 sec.