DOOR CONTROL SWITCH > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT DOOR CONTROL SWITCH ASSEMBLY


B106209E01

  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    2 - 3
    		Lock
    		Below 1 Ω
    4 - 3
    		Unlock
    		Below 1 Ω
    2 - 3
    		Unlock
    		10 kΩ or higher
    4 - 3
    		Lock
    		10 kΩ or higher

    If the result is not as specified, replace the switch assembly.