HEADLIGHT LEVELING ECU > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE FRONT DOOR SCUFF PLATE


B111627E01

  1. Using a moulding remover, detach the 5 claws and remove the scuff plate.



3. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY


B110167

  1. Disconnect the connector.

  1. Remove the bolt, nut and ECU.