DTC    5C-41    Steering Sensor Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
5C-41
  1. Fail frag is transmitted from steering sensor.
  2. Fail frag is transmitted from steering control ECU (3UZ-FE Only)
  1. Steering sensor
  2. VGRS system

INSPECTION PROCEDURE

1.CHECK MULTI-INFORMATION DISPLAY

HINT:
Only vehicles with 3UZ-FE type engines are equipped with the VGRS system. If this DTC is output in a vehicle with another type of engine, replace the steering sensor.

  1. Check that "CHECK VGRS" is output on the multi-information display.

    Result:
    Display (CHECK VGRS output)
    		Proceed to
    CHECK VGRS output
    		A
    No output
    		B



B
REPLACE STEERING SENSOR
A

GO TO VARIABLE GEAR RATIO STEERING SYSTEM