CRUISE CONTROL ECU (for RHD) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


B105644E01

  1. Remove the 2 screws.

  1. Detach the 2 claws.

  1. Remove the under cover and then disconnect the connector.



3. REMOVE DISTANCE CONTROL ECU ASSEMBLY



B112082E02

  1. Disconnect the connector.

  1. Remove the 2 nuts and distance control ECU.