BRAKE MASTER CYLINDER (w/ ECB) > INSPECTION

for Preparation Click here



1. INSPECT BRAKE MASTER CYLINDER SUB-ASSEMBLY

  1. Inspect the brake master cylinder sub-assembly. If any of the following occurs, replace the brake master cylinder sub-assembly with a new one :

    1. The surface of the brake master cylinder sub-assembly is cracked, dented, or chipped off.



2. INSPECT BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY

  1. Inspect the brake stroke simulator cylinder sub-assembly. If any of the following occurs, replace the brake stroke simulator cylinder sub-assembly with a new one.

    1. The surface of the brake stroke simulator cylinder sub-assembly is cracked, dented, or chipped off.