REAR BRAKE FLEXIBLE HOSE > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedure listed below are for the LH side.



1. REMOVE REAR WHEEL


2. DRAIN BRAKE FLUID


3. REMOVE REAR BRAKE FLEXIBLE HOSE


    C105646

  1. Remove the brake tube with SST while holding the rear brake flexible hose with a wrench.

    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake tube.
    2. Do not allow any foreign matter such as dirt and dust to enter rear brake flexible hose with a wrench.

  1. Remove the clip.

  1. Remove the union bolt, the rear brake flexible hose and gasket.