POWER WINDOW CONTROL SYSTEM > Key-off Operation Function Operates even if Operating Conditions are not Satisfied

for Preparation Click here


DESCRIPTION

  1. The multiplex network master switch keeps power supplied to the power window regulator motor for 43 seconds after the engine switch is turned off. However, the master switch will cut power if one of the following occurs: 1) driver side door is opened within 43 seconds, 2) a signal from the driver door courtesy light switch is input to the cowl side junction block ECU RH within 43 seconds, or 3) no power window activity occurs within 43 seconds.

WIRING DIAGRAM


B108817E04


INSPECTION PROCEDURE

1.CHECK OPERATION FUNCTION AFTER ENGINE SWITCH IS TURNED OFF
  1. Check the power window operation function after the engine switch is turned off.

    Result: 

    Proceed to
    Driver side door is opened within 43 seconds but the power windows can still operate
    A
    43 seconds pass and the power windows can still operate
    B



B
REPLACE COWL SIDE JUNCTION BLOCK RH (MULTIPLEX NETWORK BODY ECU)
A


2.CHECK OPERATION OF FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
  1. Open the driver side door and check that the map light illuminates.

    OK:
    Map light illuminates.



NG
GO TO LIGHTING SYSTEM
OK

REPLACE COWL SIDE JUNCTION BLOCK RH (MULTIPLEX NETWORK BODY ECU)