ABS MAIN RELAY (w/ ECB) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT ABS MAIN RELAY


    F050241E03

  1. Remove the ABS MAIN1 relay and ABS MAIN2 relay.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    3 - 5
    		Always
    		10 kΩ or higher
    ( No continuity)
    3 - 5
    		Apply B+ between terminal 1 and 2
    		Below 1 Ω
    (Continuity)