3GR-FE STARTING > SERVICE DATA



Starter relay
3 - 5
Specified resistance
10 MΩ or higher
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Starter cut relay
3 - 5
Specified resistance
10 MΩ or higher
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Engine switch
7 (SS1) - 5 (GND) / 2 (SS2) - 5 (GND)
Specified resistance
Not pushed: 10kΩ or higher
Pushed: Below 1 Ω
Standard condition: Illuminates
Measurement condition
Battery positive 11 (SWIL) - Battery negative 4 (COM) or 5 (GND)
Battery positive 12 (INDS) - Battery negative 4 (COM) or 5 (GND)
Battery positive 13 (INDW) - Battery negative 4 (COM) or 5 (GND)