OIL PUMP > REMOVAL > Preparation
 | 09032-00100 | Oil Pan Seal Cutter |
 | 09213-70011 | Crankshaft Pully Holding Tool |
 | (09213-70020) | Bolt |
 | 09330-00021 | Companion Flange Holding Tool |
 | 09843-18040 | Diagnosis Check Wire No.2 |
 | 09950-50013 | Puller C Set |
 | (09951-05010) | Hanger 150 |
 | (09952-05010) | Slide Arm |
 | (09953-05020) | Center Bolt 150 |
 | (09954-05021) | Claw No.2 |
 | 09960-10010 | Variable Pin Wrench Set |
 | (09962-01000) | Variable Pin Wrench Arm Assy |
 | (09963-00700) | Pin 7 |
| Oil pressure gauge | - |
| Straight edge | Oil pump |
| Torque wrench | - |
| Item | Capacity | Classification |
| Engine oil (2WD) Drain and refill w/ Oil filter change Drain and refill w/o Oil filter change Dry fill | - 6.3 litters (6.7 US qts, 5.5 imp. qts) 5.9 litters (6.2 US qts, 5.2 imp. qts) 7.2 litters (7.6 US qts, 6.3 imp. qts) | API grade SL, Energy-Conserving or ILSAC, multigrade engine oil is recommended. SAE 5W-30 is the best choice for your vehicle, for good fuel economy, and good starting in cold weather. |
| Engine oil (4WD) Drain and refill w/ Oil filter change Drain and refill w/o Oil filter change Dry fill | - 6.4 litters (6.8 US qts, 5.6 imp. qts) 6.0 litters (6.3 US qts, 5.3 imp. qts) 7.7 litters (8.1 US qts, 6.8 imp. qts) | API grade SL, Energy-Conserving or ILSAC, multigrade engine oil is recommended. SAE 5W-30 is the best choice for your vehicle, for good fuel economy, and good starting in cold weather. |
 | 09040-00011 | Hexagon Wrench Set | - |
 | (09043-20080) | Socket Hexagon Wrench 8 | - |
 | 08826-00080 | Seal Packing Black or equivalent (FIPG) | - |