EXTENSION HOUSING REAR OIL SEAL > INSTALLATION > Preparation
 | 09316-60011 | Transmission & Transfer Bearing Replacer |
 | (09316-00011) | Replacer Pipe |
 | (09316-00051) | Replacer D |
 | 09330-00021 | Companion Flange Holding Tool |
 | 09517-36010 | Rear Axle Shaft Oil Seal Replacer- |
 | 09950-30012 | Puller A Set |
 | (09955-03040) | Lower Plate 150 |
| Feeler gauge | |
| Cylinder gauge | |
| Vernier calipers | |
| Dial indicator | |
| Micrometer | |
| Straight edge | |
| Torque wrench | |
| Angle gauge | |
| V block | |
| Dial indicator or dial indicator with magnetic base |
| Automatic transmission fluid: Dry fill | 8.6 litter (9.1 US qts, 7.6 lmp.qts) | ATF WS |
| Automatic transmission fluid: Drain and refill | 1.7 litter (1.8 US qts, 1.5 lmp.qts) | ATF WS |
 | 09017-12301 | Deep Socket Wrench 30 mm . | |
 | 09031-00030 | Pin Punch | |
 | 09040-00011 | Hexagon Wrench Set | |
 | (09043-20060) | Socket Hexagon Wrench 6 |
 | 08826-00090 | Seal Packing 1281, THREE BOND 1281 or equivalent (FIPG) |