WATER PUMP > REMOVAL > Preparation
 | 09213-70011 | Crankshaft Pully Holding Tool |
 | 09330-00021 | Companion Flange Holding Tool |
 | 09950-50013 | Puller C Set |
 | (09951-05010) | Hanger 150 |
 | (09952-05010) | Slide Arm |
 | (09953-05010) | Center Bolt 100 |
 | (09953-05020) | Center Bolt 150 |
 | (09954-05021) | Claw No.2 |
 | 09960-10010 | Variable Pin Wrench Set |
 | (09962-01000) | Variable Pin Wrench Arm Assy |
 | (09963-00350) | Pin 3.5 |
| Item | Capacity | Classification |
| Engine coolant | 11.0 liters (11.7 US qts, 9.7 lmp. qts) | Use only "TOYOTA Super Long Life Coolant (SLLC)" or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids). |
| Heater | - |
| Radiator cap tester | - |
| Thermometer | - |
| Torque wrench | - |
| Vernier caliper | - |
 | 09082-00040 | TOYOTA Electrical Tester | - |
 | (09083-00150) | Test Lead Set | - |