ELECTRONIC CONTROLLED AUTOMATIC TRANSMISSION SYSTEM > Transmission Control Switch Circuit > Preparation
| Feeler gauge | |
| Cylinder gauge | |
| Vernier calipers | |
| Dial indicator | |
| Micrometer | |
| Straight edge | |
| Torque wrench | |
| Angle gauge | |
| V block | |
| Dial indicator or dial indicator with magnetic base |
| Automatic transmission fluid: Dry fill | 7.7 litter (8.1 US qts, 6.8 lmp.qts) | ATF WS |
| Automatic transmission fluid: Drain and refill | 1.5 litter (1.6 US qts, 1.3 lmp.qts) | ATF WS |
 | 09031-00030 | Pin Punch | |
 | 09040-00011 | Hexagon Wrench Set | |
 | (09043-20060) | Socket Hexagon Wrench 6 | |
 | 09905-00012 | Snap Ring No.1 Expander | |
 | 09905-00013 | Snap Ring Pliers |
 | 08826-00090 | Seal Packing 1281, THREE BOND 1281 or equivalent (FIPG) |