CUSTOMIZE PARAMETERS
Troubleshooting
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
Body No. 3 (Main Body ECU LH): Display (Item)
Default
Contents
Setting
AUTO WIPER (Auto wiper)
AVAIL
Function to operate the wiper automatically when it is raining
NOT AVAIL / AVAIL
REWPER CONTROL (Rewiper control)
SPD MOD
Function to change the time between end of wiper motor operation and start of wiper operation to prevent streaking from washer fluid
OFF / 3 s / SPD MOD
SPEED MODE (Speed mode)
AVAIL
Function to change to the intermittent operation when the vehicle comes to a stop from driving condition with the wiper switch in the LO position
NOT AVAIL / AVAIL
- When the customer requests a change in a function, first make sure that the function can be customized.