Lexus IS250 · Service Manual ENGINE

INSTALLATION

Removal / installation


1. INSTALL VENTILATION VALVE

  1. A105280E01
    Install the ventilation valve.

    1. Apply adhesive to 2 or 3 threads.

      Adhesive:
      Part No. 08833-00070, THREE BOND 1324 or equivalent.

    2. Install the ventilation valve.

      Torque:
      27 N*m{ 275 kgf*cm , 20 ft.*lbf }


2. CONNECT VENTILATION HOSE

  1. A107678
    Connect the ventilation hose to the ventilation valve.


3. INSTALL V-BANK COVER SUB-ASSEMBLY

  1. A127528
    Engage the 2 clips on the front of the cover, and then engage the clip on the rear to install the V-bank cover.

    NOTICE:
    1. Be sure to engage the clips securely.
    2. Do not apply excessive force or do not hit the cover to engage the clips. This may cause the cover to break.

← INSPECTIONCOMPONENTS →