Lexus IS250 · Service Manual ENGINE

REMOVAL

Removal / installation


1. REMOVE V-BANK COVER SUB-ASSEMBLY

  1. A127528
    Raise the V-bank cover to disengage the clip on the rear of the cover. Raise the cover again to disengage the 2 clips on the front of the cover and remove the cover.

    NOTICE:
    Attempting to disengage both front and rear clips at the same time may cause the cover to break.


2. DISCONNECT VENTILATION HOSE

A107678

  1. Disconnect the ventilation hose from the ventilation valve.


3. REMOVE VENTILATION VALVE

  1. Remove the ventilation valve.

← COMPONENTSINSPECTION →