Lexus IS250 · Service Manual ENGINE

REMOVAL

Removal / installation


1. REMOVE V-BANK COVER SUB-ASSEMBLY

  1. A127528
    Raise the V-bank cover to disengage the clip on the rear of the cover. Raise the cover again to disengage the 2 clips on the front of the cover and remove the cover.

    NOTICE:
    Attempting to disengage both front and rear clips at the same time may cause the cover to break.


2. REMOVE VACUUM SWITCHING VALVE (for EVAP)

  1. A124997E01
    Disconnect the connector and clamp.

  1. Disconnect the 2 hoses.

  1. Remove the VSV from the intake air connector.

← ON-VEHICLE INSPECTIONINSPECTION →