INSTALLATION

Install the front lower ball joint to the front lower suspension arm with the nut.

NOTICE:

Ensure that the thread and taper are free of oil or other foreign matter.

Torque:

162 N*m{ 1,650 kgf*cm , 120 ft.*lbf }

Install a new clip to the front lower ball joint.

NOTICE:

Further tighten the nut up to 60° if the holes for the cotter pin are not aligned.

Torque:

Bolt 1:

204 N*m{ 2,080 kgf*cm , 150 ft.*lbf }

Bolt 2:

86 N*m{ 877 kgf*cm , 63 ft.*lbf }

Bolt 3:

50 N*m{ 510 kgf*cm , 37 ft.*lbf }

HINT:

Insert the bolt from the front of the vehicle.

Torque:

120 N*m{ 1,220 kgf*cm , 89 ft.*lbf }