Lexus IS250 · Service Manual BRAKE

REMOVAL

Removal / installation

HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedures listed below are for the LH side.


1. REMOVE FRONT WHEEL

2. DRAIN BRAKE FLUID

3. REMOVE FRONT BRAKE FLEXIBLE HOSE

  1. C110253
    Remove the brake line with SST while holding the front brake flexible hose with a wrench.
    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake tube.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.

  1. Remove the clip.

  1. Remove the union bolt, the front brake flexible hose and gasket.

← COMPONENTSINSTALLATION →