Lexus IS250 · Service Manual BRAKE

REMOVAL

Removal / installation

HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedures listed below are for the LH side.


1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

3. REMOVE REAR BRAKE FLEXIBLE HOSE

  1. C105646
    Remove the brake tube with SST while holding the rear brake flexible hose with a wrench.
    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake line.
    2. Do not allow any foreign matter such as dirt and dust to enter the rear brake flexible hose from the connecting points.

  1. Remove the clip.

  1. Remove the union bolt, the rear brake flexible hose and gasket.

← COMPONENTSINSTALLATION →