Lexus IS250 · Service Manual BODY

INSTALLATION

Removal / installation


1. INSTALL REAR SEATBACK ASSEMBLY

  1. B121660
    Place the seatback in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Install the seatback with the 4 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. Pass the 3 seat belts through and close the cap of the 2 rear seat shoulder belt guides.

  1. Install the floor anchor part with the bolt.


2. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

3. INSTALL REAR SEAT HEADREST ASSEMBLY

4. INSTALL REAR SEAT CUSHION ASSEMBLY

  1. B123725E02
    Attach the 2 rear hooks of the seat cushion to the seatback.

  1. Attach the 2 front hooks of the seat cushion to the vehicle body.

  1. Confirm that the seat cushion is firmly installed.

    NOTICE:
    When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.

← REASSEMBLYCOMPONENTS →