INSTALLATION
Removal / installation
| 1. INSTALL FUEL PUMP RESISTOR |
Install the fuel pump resistor with the bolt.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Install the ground wires with the 2 bolts.
- Torque:
- 8.0 N*m{ 80 kgf*cm , 69 in.*lbf }
Connect the connector with the clamp.
| 2. INSTALL ENGINE ROOM RH SIDE COVER |
Install the side cover with the 2 clips.
| 3. INSTALL COOL AIR INTAKE DUCT SEAL |
Install the intake duct seal with the 11 clips.