CUSTOMIZE PARAMETERS
Troubleshooting
| CUSTOMIZE PARAMETERS (INTELLIGENT TESTER) |
The following items can be customized:
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
| DISPLAY (ITEM) |
DEFAULT |
CONTENTS |
SETTING |
| Rear buzzer onset range |
Wide |
Function to set rear buzzer activation range /Narrow or Wide |
Narrow: 600 mm (23.62 in.) Wide: 1,500 mm (59.06 in.) |
| Keep sense status buzzer |
ON |
Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds |
ON / OFF |
| Front & rear buzzer volume |
M2 |
Function to change volume of buzzer /L, M1, M2, M3 or H |
L: Low volume M1: Medium low volume M2: Medium volume M3: Medium high volume H: high volume |
| DISPLAY (ITEM) |
DEFAULT |
CONTENTS |
SETTING |
| Non P/R range sensor |
F |
Function to set available sensors when shift position is not in P or R / F, Rcrn2 or F |
F, Rcrn2: Corner sensors are available F: Front sensors are available |