ON-VEHICLE INSPECTION

Inspection

INSPECT DEFOGGER RELAY (Marking: DEFOG)

1. Measure the resistance of the DEFOG relay.
   

   Standard:

   Tester Condition	Specified Condition
   3 - 4	Below 1 Ω (when battery voltage is not applied between terminals)
   3 - 5	10 kΩ or higher (when battery voltage is not applied between terminals)
   3 -5	Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

   If the result is not as specified, replace the relay.