Lexus IS250 · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation


1. REMOVE REAR WHEEL

2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR

  1. C117266
    Remove the 2 nuts and the No. 2 differential support protector.


3. REMOVE REAR SUSPENSION MEMBER BRACE

  1. C117267
    Remove the 2 bolts and rear suspension member brace.


4. REMOVE REAR NO. 2 SUSPENSION ARM

  1. C106395E01
    Remove the bolt and nut, and disconnect the rear stabilizer link assembly and the height control sensor link bracket.

  1. Remove the bolt and nut, and disconnect the rear shock absorber with coil spring.

    NOTICE:
    Turn the bolt while holding the nut.

  1. Remove the nut and bolt on the axle carrier side, and separate the rear No. 2 suspension arm.

    NOTICE:
    Turn the bolt while holding the nut.

  1. Remove the bolt, nut, and washer on the rear suspension member side, and remove the rear No. 2 suspension arm.

← COMPONENTSINSTALLATION →