Lexus IS250 · Service Manual BODY

INSTALLATION

Removal / installation

HINT:
When installing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.

Heating temperature: 
Item
 Temperature
Vehicle Body
 40 to 60°C (104 to 140°F)
Emblem
 20 to 30°C (68 to 86°F)
Name Plate
 20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, emblem and name plate excessively.


1. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the No. 3 luggage compartment door plate. (If reusing the No. 3 luggage compartment door plate)

    1. Using a heat light, heat the No. 3 luggage compartment door plate.

    2. Remove the double-sided tape from the No. 3 luggage compartment door plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the No. 3 luggage compartment door plate.

  1. Install the No. 3 luggage compartment door plate.

    1. Using a heat light, heat the vehicle body and No. 3 luggage compartment door plate.

    2. Remove the peeling paper from the face of the No. 3 luggage compartment door plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the No. 3 luggage compartment door plate.

      B125617E01


2. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the No. 1 luggage compartment door name plate. (If reusing the No. 1 luggage compartment door name plate)

    1. Using a heat light, heat the No. 1 luggage compartment door name plate.

    2. Remove the double-sided tape from the No. 1 luggage compartment door name plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the No. 1 luggage compartment door name plate.

  1. Install the No. 1 luggage compartment door name plate.

    1. Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.

    2. Remove the peeling paper from the face of the No. 1 luggage compartment door name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the No. 1 luggage compartment door name plate.

      B125562E01


3. INSTALL SYMBOL EMBLEM

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the symbol emblem. (If reusing the symbol emblem)

    1. Using a heat light, heat the symbol emblem.

    2. Remove the double-sided tape from the symbol emblem.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the symbol emblem.

  1. Install the symbol emblem.

    1. Using a heat light, heat the vehicle body and symbol emblem.

    2. Remove the peeling paper from the face of the symbol emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the symbol emblem.

      B125563E01

← REMOVALCOMPONENTS →