B2060

DESCRIPTION

This DTC is output when a malfunction in the brake system is detected. This circuit consists of the skid control ECU and seat belt control ECU. Signals are sent from the skid control ECU using the CAN communication.

DTC No.	DTC Detection Condition	Trouble Area
B2060	Malfunction in brake system is detected	Skid control ECU Seat belt control ECU

INSPECTION PROCEDURE

NOTICE:

When the seat belt control ECU is replaced with a new one, INITIALIZATION must be performed (Click here).

1. CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM)

1. Delete the DTC (Click here).

2. Recheck for DTC.

   OK:

   DTC U0122 is not output.
   

NG	GO TO CAN COMMUNICATION SYSTEM

OK

2. CHECK DTC OUTPUT (BRAKE CONTROL SYSTEM)

1. Delete the DTC (Click here).

2. Recheck for DTC.

   OK:

   DTC is not output.
   

NG	GO TO BRAKE CONTROL SYSTEM

OK

3. CHECK DTC OUTPUT (PRE-CRASH SAFETY SYSTEM)

1. Delete the DTC (Click here).

2. Recheck for DTC.

   OK:

   DTC B2060 is not output.
   

NG	REPLACE SEAT BELT CONTROL ECU

OK
USE SIMULATION METHOD TO CHECK