DATA LIST / ACTIVE TEST
System information
- HINT:
- By accessing the DATA LIST displayed on the intelligent tester, you can perform such functions as reading the values of switches and sensors without removing any parts. Reading the DATA LIST as the first step in troubleshooting is one method to shorten labor time.
| DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Following the display on the tester screen, read the "DATA LIST".
Item
Measurement Item/
Range (Display)
Normal Condition
Diagnostic Note
D Seat
Seat position (Driver side)/
FORWARD: Seat position is forward
BKWARD: Seat position is backward
FAIL: Failure detected
FORWARD/BKWARD
-
P Class
Passenger Classification/
NG: Data is not determined
OFF: Vacant
CHILD: Child (less than 36 kg (79.37 lb)) is seated
AF05: Adult (36 to 54 kg (79.37 to 119.05 lb) is seated
AM50: Adult (more than 54 kg (119.05 lb)) is seated
FAIL: A failure is detected
OFF/CHILD/AF05/AM50
-
P Detect
Passenger detection/
NG: Data is not determined
NONE: No passenger
DETECT: A passenger is seated
FAIL: Failure detected
NONE/DETECT
-
D Bk SW
Buckle switch (Driver side)/
UNSET: The seat belt is not fastened
SET: The seat belt is fastened
NG: Data is not determined
UNSET/SET
-
L Bk SW
Buckle switch (Left side)/
UNSET: The seat belt is not fastened
SET: The seat belt is fastened
NG: Data is not determined
UNSET/SET
-
P Bk SW
Buckle switch (Passenger side)/
UNSET: The seat belt is not fastened
SET: The seat belt is fastened
NG: Data is not determined
UNSET/SET
-
R Bk SW
Buckle switch (Right side)/
UNSET: The seat belt is not fastened
SET: The seat belt is fastened
NG: Data is not determined
UNSET/SET
-
Disp Typ
Display type identification information/
LR: The display is indicated by LH/RH
DP: The display is indicated by Driver/Passenger
DP
-
#Past Codes
Number of past trouble codes/
Min.: 0, Max.: 255
0
-