Lexus IS250 · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation


1. REMOVE REAR WHEEL

2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR

  1. C117266
    Remove the 2 nuts and the No. 2 differential support protector.


3. SEPARATE REAR STABILIZER LINK ASSEMBLY

  1. C106393E01
    Remove the bolt and nut (A), and separate the rear stabilizer link assembly and the height control sensor link bracket from the rear No. 2 suspension arm.


4. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING

  1. Remove the bolt and nut (B), and separate the rear shock absorber with coil spring from the rear No. 2 suspension arm assembly.


5. REMOVE REAR UPPER NO. 1 CONTROL ARM

  1. C104408E01
    Remove the bolt, nut, washer, and the rear No. 1 upper control arm from the rear axle carrier.

    NOTICE:
    Push the axle carrier downward.

  1. C104409E01
    Remove the bolts, nuts, washers, and the rear upper No. 1 control arm from the rear suspension member.

← COMPONENTSINSTALLATION →