DATA LIST / ACTIVE TEST
System information
| DATA LIST |
- HINT:
- Using the intelligent tester Data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data list early in troubleshooting is one way to shorten labor time.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Enter the following menus: Main Body / Body or Body No. 5 / Data List.
Read the Data list according to the display on the tester.
Main Body (Main body ECU RH): Item
Measurement Item/Display (Range)
Normal Condition
Diagnostic Note
Warning by Horn
Warning by horn/ON or OFF
ON: Vehicle horns and security horn sound during alarm sounding state
OFF: Vehicle horns and security horn do not sound during alarm sounding state
-
Luggage Courtesy SW
Luggage compartment door courtesy switch/ON or OFF
ON: Luggage compartment door is OPEN
OFF: Luggage compartment door is CLOSED
-
IG SW
Ignition switch signal/ON or OFF
ON: Turn the engine switch on (IG) or start
OFF: Turn the engine switch off or on (ACC)
-
D Door Courtesy SW
D door courtesy switch/ON or OFF
ON: Driver side door is OPEN
OFF: Driver side door is CLOSED
-
P Door Courtesy SW
P door courtesy switch/ON or OFF
ON: Front passenger side door is OPEN
OFF: Front passenger side door is CLOSED
-
Rear Door Courtesy SW
Rear door courtesy switch/ON or OFF
ON: Rear door is OPEN
OFF: Rear door is CLOSED
-
Rear Lock Position SW
Rear lock position switch/ON or OFF
ON: Rear door is LOCKED
OFF: Rear door is UNLOCKED
-
Passenger Lock Position SW
Passenger lock position switch/ON or OFF
ON: Passenger door is LOCKED
OFF: Passenger door is UNLOCKED
-
Body No. 5 (Front controller): Item
Measurement Item/Display (Range)
Normal Condition
Diagnostic Note
Hood Courtesy Switch
Engine hood courtesy switch signal/ON or OFF
ON: Engine hood is OPEN
OFF: Engine hood is CLOSED
-
| ACTIVE TEST |
- HINT:
- Performing the intelligent tester Active test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to shorten the labor time. The Data list can be displayed during the Active test.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Enter the following menus: Main Body / Body or Body No. 5 / Active Test.
Perform the Active test according to the display on the tester.
Main Body (Main body ECU RH): Item
Tester Detail
Diagnostic Note
Security Indicator
Security indicator ON/OFF
-
Security Horn
Security horn ON/OFF
-
Hazard
Hazard warning light ON/OFF
-