Lexus IS250 · Service Manual RESTRAINTS

INSPECTION

Inspection


INSPECT FRONT SEAT INNER BELT ASSEMBLY RH

E105247E02

  1. Measure the resistance between terminals of the switch when the switch is operated.

    HINT:
    1. This is the inspection procedure of the inner belt switch for the tension reducer.
    2. The circuit of the seat belt warning or airbag system cannot be inspected by this procedure.

    Resistance:
    Tester Connection
    		 Condition
    		 Specified Condition
    4 - 5
    		 Seat belt is fastened
    		 Below 1 Ω
    4 - 5
    		 Seat belt is unfastened
    		 10 kΩ or higher


INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

E105247E02

  1. Measure the resistance between terminals of the switch when the switch is operated.

    HINT:
    1. This is the inspection procedure of the inner belt switch for the tension reducer.
    2. The circuit of the seat belt warning or airbag system cannot be inspected by this procedure.

    Resistance:
    Tester Connection
    		 Condition
    		 Specified Condition
    4 - 5
    		 Seat belt is fastened
    		 Below 1 Ω
    4 - 5
    		 Seat belt is unfastened
    		 10 kΩ or higher

← REMOVALINSTALLATION →