INSPECTION
Inspection
| INSPECT FUSE (HORN) |
Check the resistance of the HORN fuse.
- Standard:
- Below 1 Ω
| INSPECT HORN RELAY |
Remove the engine room R/B and J/B (horn relay).
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Condition
Specified Condition
2E-2 - 2G-2
Always
10 kΩ or higher
2E-2 - 2G-2
When battery voltage is applied to terminals 2E-2 and 2F-2
Below 1 Ω