INSPECTION
Inspection
| INSPECT LIGHT CONTROL RHEOSTAT |
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Condition
Specified Condition
E (J15-1) - RV (J15-4)
Light control rheostat position is MIN.
Below 1 Ω
E (J15-1) - RV (J15-4)
Light control rheostat position is between MIN. and MAX.
8 to 12 kΩ
E (J15-1) - RV (J15-4)
ODO/TRIP switch is OFF
10 kΩ or higher
ODO/TRIP switch is ON
Below 1 Ω
T (J15-2) - TC (J15-3)
Rheostat knob is in the MIN. position
Below 1 Ω
T (J15-2) - TC (J15-3)
Rheostat knob is in the MAX. position
10 kΩ or higher
- HINT:
- If the value is not as specified, replace the light control rheostat.