GENERAL MAINTENANCE
Removal / installation
- HINT:
- Inspect these items on a cooled down engine.
| 1. INSPECT DRIVE BELT |
| 2. REPLACE ENGINE OIL AND OIL FILTER |
| 3. REPLACE ENGINE COOLANT |
| 4. INSPECT EXHAUST PIPES AND MOUNTINGS |
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
| 5. REPLACE SPARK PLUGS |
| 6. INSPECT BATTERY |
| 7. INSPECT AIR CLEANER FILTER |
  |
Remove the air filter.
Visually check that the air filter is not excessively damaged or oily. If necessary, replace the air filter.
Reinstall the air filter.
| 8. REPLACE AIR CLEANER FILTER |
Replace the air filter with a new one.
| 9. INSPECT FUEL TANK CAP GASKET |
| 10. INSPECT FUEL LINES AND CONNECTIONS AND FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS |
Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
| 11. INSPECT CHARCOAL CANISTER |