Noise Occurs from Generator while Engine is Running

INSPECTION PROCEDURE

1. CHECK LOOSENESS OF V-RIBBED BELT

1. Check the tension of the belt by pushing it down with a finger.

   OK:

   The tension of the belt is enough.
   

NG	REPLACE V-RIBBED BELT TENSIONER ASSEMBLY

OK

2. CHECK V-RIBBED BELT FOR WEAR

1. Check the V-ribbed belt for wear.

   OK:

   The V-ribbed belt is not worn.
   

NG	REPLACE V-RIBBED BELT

OK

3. CHECK CLUTCH PULLEY FOR WEAR

1. Check the clutch pulley groove for wear or other defects.

   OK:

   The clutch pulley groove is not damaged.
   

NG	REPLACE CLUTCH PULLEY

OK

4. CHECK THAT NOISE WHILE CLUTCH PULLEY IS OPERATING

1. Perform a driving test and check if noise occurs when decelerating.

   OK:

   Noise does not occur.
   

NG	REPLACE CLUTCH PULLEY

OK
REPLACE GENERATOR ASSEMBLY