Lexus IS250 · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation


1. REMOVE INLET CONTROL SERVO MOTOR

  1. E107641E02
    Detach the claw and remove the lever.

  1. E107642
    Remove the 2 screws and inlet control servo motor.


2. REMOVE CLEAN AIR FILTER

  1. E107643E02
    Detach the 2 claws and remove the air filter.

    HINT:
    Be sure to turn the engine switch on (IG) and set the A/C to RECIRCULATION mode before removing the air filter.


3. REMOVE COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY

  1. E107644
    Remove the 3 screws and fan motor.

← REMOVALREASSEMBLY →