Lexus IS250 · Service Manual RESTRAINTS

INSTALLATION

Removal / installation


1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY

  1. B122793
    Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }


2. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY

  1. B121660
    Place the seatback in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Install the seatback with the 4 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. Pass the 3 seat belts through and close the cap of the 2 rear seat shoulder belt guides.

  1. Install the floor anchor part with the bolt.


3. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

4. INSTALL REAR SEAT HEADREST ASSEMBLY

5. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

  1. B123725E02
    Attach the 2 rear hooks of the seat cushion to the seatback.

  1. Attach the 2 front hooks of the seat cushion to the vehicle body.

  1. Confirm that the seat cushion is firmly installed.

    NOTICE:
    When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.

← REMOVALCOMPONENTS →