Lexus IS250 · Service Manual BRAKE

REMOVAL

Removal / installation


1. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

  1. B125381E01
    Put protective tape around the front door scuff plate.

  1. Using a moulding remover, disengage the 4 clips.

  1. B125382
    Disengage the 7 claws and remove the front door scuff plate LH.


2. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

HINT:
Use the same procedures for the RH side and the LH side.


3. REMOVE INSTRUMENT SIDE PANEL LH (for LHD)

  1. B123348
    Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel LH.


4. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

  1. B123354
    Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel RH.


5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

  1. B123350
    Disengage the 7 clips.

  1. Disconnect the connectors and remove the lower instrument panel finish panel sub-assembly.


6. REMOVE TRACTION OFF SWITCH

  1. C124877
    Using a screwdriver, remove the traction off switch from the instrument panel finish panel sub-assembly.

← COMPONENTSINSPECTION →