INSTALLATION
Removal / installation
| 1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) |
Using a "torx" socket wrench (T20), install the inner rear view mirror with the screw.
- Torque:
- 1.8 N*m{ 18 kgf*cm , 16 in.*lbf }
Connect the connector.
| 2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror) |
Engage the 2 claws and install the inner rear view mirror stay holder cover as shown in the illustration.
| 3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror) |
Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration to install it.
Engage the 2 claws and install the cover.