Lexus IS250 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL CLEARANCE WARNING BUZZER (for LHD)

  1. E119040E01
    Engage the clamp and install the clearance warning buzzer.

  1. Connect the connector.


2. INSTALL CLEARANCE WARNING BUZZER (for RHD)

  1. E123221E01
    Engage the clamp and install the clearance warning buzzer.

  1. Connect the connector.


3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)

4. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)

5. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL

  1. B123346
    Engage the 4 claws and install the center lower instrument cluster finish panel.


6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B123385
    Connect the connectors.

  1. Engage the 11 claws and install the No. 3 instrument panel register assembly.


7. INSTALL CONSOLE BOX

  1. B123342
    Engage the 2 claws and 2 clips.

  1. B116791
    Install the 2 bolts <C>.

  1. B123339
    Install the 2 bolts <C>.

  1. Connect the connector.

  1. B123341E01
    Connect the connectors.

  1. Engage the 2 clamps.

  1. Install the 2 bolts <C>.


8. INSTALL CONSOLE BOX REGISTER ASSEMBLY

  1. B123605
    Engage the 2 claws and 4 clips, and then install the console box register assembly.

  1. Install the rear ash receptacle assembly.


9. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY

  1. B116700E01
    Connect the connectors.

  1. Insert the protruding parts of the front ash receptacle sub-assembly into the 2 guide holes as shown in the illustration.

  1. B116698
    Install the front ash receptacle sub-assembly with the 2 screws <F>.


10. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

  1. B123400
    Engage the 6 clips.

  1. B123395
    Close the snap.


11. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

  1. B123398
    Engage the 7 claws and 2 clips.

  1. B123396
    Close the snap.


12. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)

  1. B123386
    Connect the connectors.

  1. Engage the 8 clips and install the console panel sub-assembly.


13. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)

  1. B123388
    Engage the claw and 2 clips, and then install the upper No. 2 console panel garnish.


14. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)

  1. B123387
    Engage the claw and 2 clips, and then install the upper No. 1 console panel garnish.


15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)

16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

17. ADJUST CLOCK
← INSPECTIONCOMPONENTS →