Lexus IS250 · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation


1. INSTALL REAR LIGHT LENS

2. INSTALL REAR LIGHT SOCKET AND WIRE

  1. E120579
    Connect the connector.

  1. Install the rear light socket and wire.


3. INSTALL REAR LIGHT BULB

  1. Install the rear light bulb.


4. INSTALL BACK UP LIGHT BULB

  1. Install the back up light bulb.


5. INSTALL REAR COMBINATION LIGHT BODY GASKET

  1. E120576E01
    Remove the release paper from a new rear combination light body gasket.

    NOTICE:
    1. Be sure to remove the all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.

  1. Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.


6. INSTALL REAR COMBINATION LIGHT LENS AND BODY

7. INSTALL REAR LIGHT SOCKET AND WIRE

  1. E120537
    Connect the connector and install the rear light socket and wire.


8. INSTALL REAR TURN SIGNAL LIGHT BULB

  1. Install the rear turn signal light bulb.


9. INSTALL REAR COMBINATION LIGHT BODY GASKET

  1. Remove the release paper from a new rear combination light body gasket.

    NOTICE:
    1. Be sure to remove the all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.

  1. E120535E01
    Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.

← INSPECTIONINSTALLATION →