ON-VEHICLE INSPECTION

Resistance inspection

1. Using an ohmmeter, measure the resistance between terminals.
   

   Resistance:

   Terminals: Positive (+) tester probe - Negative (-) tester probe	Resistance
   3 (VC5) - 2 (E2)	3 to 10 kΩ
   2 (E2) - 3 (VC5)	3 to 10 kΩ
   3 (VC5) - 1 (IB)	Below 0.5 kΩ
   1 (IB) - 3 (VC5)	Below 0.5 kΩ
   2 (E2) - 1 (IB)	3 to 10 kΩ
   1 (IB) - 2 (E2)	3 to 10 kΩ

   If the results are not as specified, replace the battery current sensor assembly.